"Thanks to the Kolbus AB300, it has allowed us to achieve savings in labour and purchase of tooling for the manufacture of small orders, as well as special designs and low-volume boxes. Another favorable point of the machine is that we can add many style codes thanks to its computer setup time, which allows the operator to load an order in 2 to 5 minutes."
 
Mexipack

​Dairi-Pak increase their box making capacity

Dairi-Pak is a well-established independent sheet plant. They produce plain and printed die cut cardboard boxes, corrugated fitments, and POS display units at their plant in Ruyton XI Towns (located between Oswestry and Shrewsbury in Shropshire). With their own fleet of vehicles Dairi-Pak service customers throughout the UK, with the major concentration being North and Mid Wales, Midlands, and the Northwest areas. 
 
Dairi-Pak have operated an older generation Autobox box making machine for around twenty years. It has served them well, proving to be a well-built, reliable machine, producing short to medium run lengths of mainly larger boxes, in higher board grades. 

Managing Director of Dairi-Pak, Tim Gray, recognised the increasing demand, especially for 0200 and 0201 boxes, trays, lids, and creased pads, and decided to upgrade and add another machine. He specified quick set, big box capacity, in short and medium run length production. Tim went to see the Autobox AB300 in action and was impressed by the ease of use, simplicity of set up, and flexibility of the machine when producing both jumbo and mini boxes. He was already aware of Kolbus-Autobox service and support capabilities which had always enabled their existing machines to have optimum uptime and minimal downtime. 

Tim decided to purchase an Autobox AB300 box making machine, with a FLEXO-PRINT FP300 station. The new Autobox is a centre set machine for more accuracy at higher speed, and with more digital set up and full servo control over each panel for precise size settings. The wider machine has interchangeable slotting blades to cope with bigger boxes, and with smaller or more difficult panels.

The FLEXO-PRINT station prints an area up to 1,000mm x 1,000mm, with a minimum repeat gap of only 350mm. Set up is fast, easy, and accurate. With this in-line unit the door is opened to smaller run length, personalised, box work and relieved capacity on the traditional higher volume machinery.

Arran Sethi, Kolbus UK director of sales said: “Autobox is a name synonymous with short to medium run boxmaking. We work with many sheet plants who want to offer exact sizes of smaller run length work. These jobs are often very big or very small, or made from a thin board grade, or a heavy one. 

The Autobox is an extremely versatile machine that allows sheet plants to say ‘yes’ to ‘nuisance’ work efficiently, and profitably. It can handle a sheet as wide as 2,600mm deckle x unlimited Length, and chop down to a 330mm x 100mm blank size. We are confident to say that the Autobox AB300 is the fastest short run boxmaker available. With speeds as high as 1,000 boxes per hour, the Autobox is not just for short run. We have customers making batches of up to 2,000 units quite regularly, with margins upwards of 50%. 
The machine will continue to perform day in day out with minimal ongoing costs, backed by the excellent UK technical support from Kolbus UK’s field technicians, and spare parts managers for ongoing consumables.
Back

Literature Request

Giving us your details does not mean you will be bombarded will calls and emails. We will email you a few days after you download your brochures to see if we can be of further assistance. From time to time after that we may email you with relevant news – from which you can unsubscribe at any time. You can read our privacy policy here
 
Captcha security image